Most of the time, homeowners ask us the most common questions about Lexington plumbing services. So we’ve compiled a list of the most helpful answers for homeowners.
Whether you need a quick repair or a full-scale renovation, you can count on your local Lexington plumber. Bluefrog Plumbing + Drain provides 24/7 Lexington plumbing services; our plumbers do not charge a trip fee.
Why is my toilet running?
If your toilet is constantly running, it’s a problem that must be fixed immediately. Not only is it an irritating and disruptive issue, but it can also waste gallons of water and create a higher water bill.
It’s important to understand that there are several possible reasons why your toilet may be running non-stop. Fortunately, most of these issues are relatively simple and easy to fix.
The first reason your toilet might be running is because of a faulty fill valve. This valve controls the water that enters the tank from the main water supply.
The valve is designed to continue filling the toilet until it reaches a set level, but it won’t do its job if broken. So instead, excess water will flow into the overflow tube and keep your toilet running.
Why is my water heater not working?
There are many reasons why your water heater might not be working. For example, it’s common for homeowners to be in the middle of a shower or a load of dishes and realize there’s no hot water available.
This can be frustrating, especially when it happens while you’re at work or school and need access to a hot shower. However, you can do a few things to resolve this issue before calling a plumber.
First, ensure the thermostat is set to a proper temperature (120°F for gas and 110°F for electric). This will save you energy while ensuring your hot water is warm when needed.
Next, check the pilot light on your gas water heater to ensure it burns properly. If it’s not, you can relight the flame by following the instructions on your water heater.
Why is my faucet not working?
The lack of water flowing from your faucets can be a significant inconvenience. If your hot and cold water won’t work, you might have a more substantial plumbing issue that requires professional attention.
First, check for leaks and dents in your pipes. These can block water flow to your home’s fixtures, so finding and fixing them is essential.
Another potential problem is clogged pipes. Sediment, heavy metal deposits, corrosion, and rust can all block your pipes and make it difficult for water to flow out of your fixtures.
In this case, it may be worth calling a plumber to do a video inspection and clear the junk out of your plumbing lines using hydro jetting. This will ensure your home’s plumbing is working correctly once again!
Why is my drain clogged?
You should reach for a plunger when you have a clogged drain. But more is needed.
A clogged drain can signal a more severe problem in your plumbing system. Usually, this is caused by a clog in the main sewer line.
That clog can cause wastewater to back up in any drain pipe or fixture that flows into the main sewer pipe. It can also cause air bubbles to form in your lines and lead to strange noises like gurgling, hissing, or bubbling.
Depending on the size of your drain pipes and the buildup, using a wire snake is your best bet to break through a clog. They are much longer than standard drain snakes and feature more aggressive tips that can easily penetrate blockages.
