Business

Avoid These 8 Mistakes When Doing Commercial Wiring

Wiring is not something you want to take lightly. It needs to be done right, or you could have a serious problem. Wiring can be dangerous and expensive if not done correctly. When it comes to commercial wiring, many factors have to be considered. This article will present the ten most important things to avoid when doing commercial wiring.

Don’t do the work yourself:

The first thing that you should avoid is doing the work yourself. It is not a job for amateurs; if you don’t have experience, it’s best left to the pros. You can end up doing more damage than good. It’s also important to note that commercial wiring is not the same as residential wiring, so if you’ve never done it before, it would be smart to have someone with experience walk you through the process.

Don’t skimp on the conduit:

One thing to keep in mind is that you don’t want to skimp on the conduit. It’s more expensive than regular electrical wire, so it’s tempting to use less of it. It protects the wires from damage and wear when installed on walls or ceilings. It makes your commercial building look cleaner and more professional than throwing exposed wires around it.

If your wiring job requires any work above ground level, get an electrician who knows how to properly install conduits to protect all of your electrical components during and after installation.

Don’t forget about the fire sprinklers:

It would be best if you didn’t forget about the fire sprinklers when doing commercial wiring. They are an integral part of the building’s safety and are a big reason commercial buildings have such high levels of security and protection.

There are several different fire sprinklers: some are activated by heat, while others are activated by smoke or a combination of both.

Don’t run electrical wires in air ducts:

Don’t run electrical wires in air ducts. Air ducts are not designed to carry electrical wires; they can become blocked, which can cause overheating. Electrical wires can also damage air ducts, which could cost you a lot of money if there’s a fire.

Don’t use PVC conduit:

PVC conduit is one of the most popular types of electrical wiring used in commercial buildings. But, unfortunately, it’s not very safe.

PVC conduit is not fire resistant and cannot be used in areas with high temperatures. It’s also not rated for high voltage or use in an underground environment. Additionally, PVC conduit will deteriorate when exposed to moisture over time—a serious problem if you’re using this type of wiring to run through a wet area or near a water source like a bathroom or kitchen sink where moisture can seep into your walls and cause issues down the line.

Don’t use exposed wiring:

Don’t use exposed wiring. Exposed wiring is unsafe and can be damaged by water, dust, and other elements. If you must have exposed wiring in an area where it will touch often or where it could get damaged, cover the wires with plastic tubing that matches your building’s décor. You might also consider installing a conduit so that cables can be routed safely throughout your facility rather than having them exposed at all times.

Don’t run data cables along with electrical wires:

You should not install data cables and electrical wires in the same conduit. Electrical wires carry current at high voltages, which can damage data cables. Additionally, data cables are designed to transmit information at specific frequencies, while electrical wires may have a different frequency that could cause interference with your network.

Don’t ignore building code requirements:

One of the most common mistakes people make when wiring a commercial building is ignoring building code requirements. It can be dangerous if you have never done electrical work before and don’t know what’s required. Building codes protect people and property, so ignoring them can cause major problems later.

Conclusion

Commercial wiring is a complex task that requires the right tools and knowledge to do it safely. If you want to avoid making mistakes, then it’s important to research what’s required before you start. You can also ask an electrician or building contractor for advice if you’re unsure about something.